▒Welcome to DONGSHIN TYMEC▒

본문 바로가기

Products

Features

System

Hybrid

Spec.

▪	Excellent repeatability and operability through system control applied with cutting-edge Intelligent Algorithms.
▪	Double-toggle type that maintains clamping force mechanically
▪	Dedicated screws and barrels compatible with various resins of advanced materials
▪	A sleek and elegant new design focused on user convenience and safety
▪	Excellent response to user requirements through various options (Acc, mold open/close, injection servo valves, etc.)
▪	Superior molding stability with Center-press type plate structure verified by Ansys structural analysis.

80
120
170
220
300
380
450
550

Injection unit	Model		PRO 80 WD
	Item	Unit	S	A	B
	Screw diameter	mm	30	36	40
	Injection Weight (PS)	g	77	111	137
	Calculated Injection Vol.	cm³	85	122	151
	Injection Pressure	kg/cm²	2652	1842	1492
	Injection Rate	cm³/sec	63	91	112
	Injection Stroke	mm	120
	Plasticizing Capacity	kg/hr	29	50	67
	Screw Speed	rpm	0~231
	Screw L/D	-	20:1	20:1	18:1
	Injection Speed	mm/sec	89

Clamping Unit (Double toggle)	Clamping Force	ton	80
	Opening Stroke	mm	300
	Min. Mold Thickness	mm	150
	Max. Mold Thickness	mm	460
	Max. Mold Weight	kg	300
	Tie-bar Clearance	mm	345*345
	Platen Size	mm	500*500
	Ejector Force	ton	2.7
	Ejector Stroke	mm	100

General ※HYBRID Green color	Heater Capacity	kW	11.15
	Pump Motor Capacity	kW	16[15]
	Total Wattage	kW	28.35[22.9]
	Oil Tank Capacity	ℓ	145[220]
	Machine Size (L x W x H)	m	4.281.221.51 [4.281.331.51]
	Machine Weight	ton	4.0
	Water Requirement	ℓ/min	16[30]

•	Calculated Injection Volume = Cross-sectional area of screw x Screw stroke
•	Injection Weight = Calculated injection volume x Material constant
•	Total Power Capacity = Heater capacity + Motor capacity + Control power capacity
•	Cooling water consumption is for the injection molding process; mold cooling requirements are not included.
•	The figures in the above table are subject to change without prior notice due to continuous research and development.

Injection unit	Model		PRO 120 WD
	Item	Unit	S	A	B
	Screw diameter	mm	36	40	45
	Injection Weight (PS)	g	148	183	232
	Calculated Injection Vol.	cm³	163	201	254
	Injection Pressure	kg/cm²	2458	1991	1573
	Injection Rate	cm³/sec	86	106	135
	Injection Stroke	mm	160
	Plasticizing Capacity	kg/hr	42	56	77
	Screw Speed	rpm	0~193
	Screw L/D	-	20:1	20.25:1	18:1
	Injection Speed	mm/sec	84

Clamping Unit (Double toggle)	Clamping Force	ton	120
	Opening Stroke	mm	350
	Min. Mold Thickness	mm	170
	Max. Mold Thickness	mm	500
	Max. Mold Weight	kg	480
	Tie-bar Clearance	mm	410*410
	Platen Size	mm	610*610
	Ejector Force	ton	4.0
	Ejector Stroke	mm	120

General ※HYBRID Green color	Heater Capacity	kW	13.5
	Pump Motor Capacity	kW	21[18.5]
	Total Wattage	kW	35.7[27]
	Oil Tank Capacity	ℓ	185[300]
	Machine Size (L x W x H)	m	4.781.361.63 [4.781.441.63]
	Machine Weight	ton	5.0
	Water Requirement	ℓ/min	21[38]

•	Calculated Injection Volume = Cross-sectional area of screw x Screw stroke
•	Injection Weight = Calculated injection volume x Material constant
•	Total Power Capacity = Heater capacity + Motor capacity + Control power capacity
•	Cooling water consumption is for the injection molding process; mold cooling requirements are not included.
•	The figures in the above table are subject to change without prior notice due to continuous research and development.

Injection unit	Model		PRO 170 WD
	Item	Unit	S	A	B	C
	Screw diameter	mm	40	45	50	55
	Injection Weight (PS)	g	252	318	393	476
	Calculated Injection Vol.	cm³	276	350	432	523
	Injection Pressure	kg/cm²	2428	1919	1554	1284
	Injection Rate	cm³/sec	106	134	165	199
	Injection Stroke	mm	220
	Plasticizing Capacity	kg/hr	58	79	100	134
	Screw Speed	rpm	0~198
	Screw L/D	-	22.75:1	20:1	18:1	16:1
	Injection Speed	mm/sec	84

Clamping Unit (Double toggle)	Clamping Force	ton	170
	Opening Stroke	mm	440
	Min. Mold Thickness	mm	190
	Max. Mold Thickness	mm	560
	Max. Mold Weight	kg	800
	Tie-bar Clearance	mm	520*520
	Platen Size	mm	740*740
	Ejector Force	ton	4.0
	Ejector Stroke	mm	140

General ※HYBRID Green color	Heater Capacity	kW	14.15
	Pump Motor Capacity	kW	25[22]
	Total Wattage	kW	40.35[31.1]
	Oil Tank Capacity	ℓ	220[350]
	Machine Size (L x W x H)	m	5.131.451.78 [5.131.561.78]
	Machine Weight	ton	7.0
	Water Requirement	ℓ/min	25[44]

•	Calculated Injection Volume = Cross-sectional area of screw x Screw stroke
•	Injection Weight = Calculated injection volume x Material constant
•	Total Power Capacity = Heater capacity + Motor capacity + Control power capacity
•	Cooling water consumption is for the injection molding process; mold cooling requirements are not included.
•	The figures in the above table are subject to change without prior notice due to continuous research and development.

Injection unit	Model		PRO 220 WD
	Item	Unit	S	A	B	C
	Screw diameter	mm	50	55	60	68
	Injection Weight (PS)	g	447	541	643	826
	Calculated Injection Vol.	cm³	491	593	706	907
	Injection Pressure	kg/cm²	2218	1833	1540	1198
	Injection Rate	cm³/sec	187	226	269	346
	Injection Stroke	mm	250
	Plasticizing Capacity	kg/hr	112	145	183	242
	Screw Speed	rpm	0~213
	Screw L/D	-	21.84:1	19.85:1	18.2:1	16.05:1
	Injection Speed	mm/sec	95

Clamping Unit (Double toggle)	Clamping Force	ton	220
	Opening Stroke	mm	520
	Min. Mold Thickness	mm	230
	Max. Mold Thickness	mm	550
	Max. Mold Weight	kg	1100
	Tie-bar Clearance	mm	560*490
	Platen Size	mm	830*760
	Ejector Force	ton	7.03
	Ejector Stroke	mm	130

General ※HYBRID Green color	Heater Capacity	kW	20.575
	Pump Motor Capacity	kW	40[37]
	Total Wattage	kW	61.775[50.3]
	Oil Tank Capacity	ℓ	360[500]
	Machine Size (L x W x H)	m	6.781.571.96 [6.461.571.96]
	Machine Weight	ton	11
	Water Requirement	ℓ/min	40[74]

•	Calculated Injection Volume = Cross-sectional area of screw x Screw stroke
•	Injection Weight = Calculated injection volume x Material constant
•	Total Power Capacity = Heater capacity + Motor capacity + Control power capacity
•	Cooling water consumption is for the injection molding process; mold cooling requirements are not included.
•	The figures in the above table are subject to change without prior notice due to continuous research and development.

Injection unit	Model		PRO 300 WD
	Item	Unit	S	A	B	C
	Screw diameter	mm	60	67	70	80
	Injection Weight (PS)	g	720	898	981	1281
	Calculated Injection Vol.	cm³	792	987	1077	1407
	Injection Pressure	kg/cm²	2083	1670	1530	1171
	Injection Rate	cm³/sec	300	374	409	534
	Injection Stroke	mm	280
	Plasticizing Capacity	kg/hr	172	221	249	343
	Screw Speed	rpm	0~201
	Screw L/D	-	21.33:1	19.10:1	18.29:1	16:1
	Injection Speed	mm/sec	106

Clamping Unit (Double toggle)	Clamping Force	ton	300
	Opening Stroke	mm	590
	Min. Mold Thickness	mm	300
	Max. Mold Thickness	mm	680
	Max. Mold Weight	kg	1900
	Tie-bar Clearance	mm	685*580
	Platen Size	mm	995*890
	Ejector Force	ton	11
	Ejector Stroke	mm	150

General ※HYBRID Green color	Heater Capacity	kW	27.45
	Pump Motor Capacity	kW	47[55]
	Total Wattage	kW	75.65[71.4]
	Oil Tank Capacity	ℓ	540[810]
	Machine Size (L x W x H)	m	7.831.762.07 [7.541.762.07]
	Machine Weight	ton	15.2
	Water Requirement	ℓ/min	47[110]

•	Calculated Injection Volume = Cross-sectional area of screw x Screw stroke
•	Injection Weight = Calculated injection volume x Material constant
•	Total Power Capacity = Heater capacity + Motor capacity + Control power capacity
•	Cooling water consumption is for the injection molding process; mold cooling requirements are not included.
•	The figures in the above table are subject to change without prior notice due to continuous research and development.

Injection unit	Model		PRO 380 WD
	Item	Unit	S	A	B
	Screw diameter	mm	65	70	75
	Injection Weight (PS)	g	906	1051	1206
	Calculated Injection Vol.	cm³	995	1155	1325
	Injection Pressure	kg/cm²	2237	1929	1680
	Injection Rate	cm³/sec	308	358	410
	Injection Stroke	mm	300
	Plasticizing Capacity	kg/hr	184	219	259
	Screw Speed	rpm	0~177
	Screw L/D	-	24:1	22.3:1	20.8:1
	Injection Speed	mm/sec	92

Clamping Unit (Double toggle)	Clamping Force	ton	380
	Opening Stroke	mm	700
	Min. Mold Thickness	mm	300
	Max. Mold Thickness	mm	750
	Max. Mold Weight	kg	2500
	Tie-bar Clearance	mm	710*710
	Platen Size	mm	1020*1020
	Ejector Force	ton	10.6
	Ejector Stroke	mm	200

General ※HYBRID Green color	Heater Capacity	kW	39.92
	Pump Motor Capacity	kW	57[45]
	Total Wattage	kW	98.12[69.7]
	Oil Tank Capacity	ℓ	540[740]
	Machine Size (L x W x H)	m	7.691.991.98 [7.61.991.98]
	Machine Weight	ton	14
	Water Requirement	ℓ/min	57[90]

•	Calculated Injection Volume = Cross-sectional area of screw x Screw stroke
•	Injection Weight = Calculated injection volume x Material constant
•	Total Power Capacity = Heater capacity + Motor capacity + Control power capacity
•	Cooling water consumption is for the injection molding process; mold cooling requirements are not included.
•	The figures in the above table are subject to change without prior notice due to continuous research and development.

Injection unit	Model		PRO 450 WD
	Item	Unit	S	A	B	C
	Screw diameter	mm	80	85	90	100
	Injection Weight (PS)	g	1464	1652	1853	2287
	Calculated Injection Vol.	cm³	1608	1815	2035	2513
	Injection Pressure	kg/cm²	1971	1746	1557	1262
	Injection Rate	cm³/sec	376	425	477	588
	Injection Stroke	mm	320
	Plasticizing Capacity	kg/hr	232	269	310	401
	Screw Speed	rpm	0~136
	Screw L/D	-	21.5:1	20.2:1	19:1	17.2:1
	Injection Speed	mm/sec	74

Clamping Unit (Double toggle)	Clamping Force	ton	450
	Opening Stroke	mm	680
	Min. Mold Thickness	mm	350
	Max. Mold Thickness	mm	750
	Max. Mold Weight	kg	3100
	Tie-bar Clearance	mm	790*740
	Platen Size	mm	1150*1100
	Ejector Force	ton	17.2
	Ejector Stroke	mm	180

General ※HYBRID Green color	Heater Capacity	kW	46.64
	Pump Motor Capacity	kW	66[67]
	Total Wattage	kW	113.84[93.2]
	Oil Tank Capacity	ℓ	640[950]
	Machine Size (L x W x H)	m	8.932.042.31 [8.742.042.31]
	Machine Weight	ton	24.5
	Water Requirement	ℓ/min	66[134]

•	Calculated Injection Volume = Cross-sectional area of screw x Screw stroke
•	Injection Weight = Calculated injection volume x Material constant
•	Total Power Capacity = Heater capacity + Motor capacity + Control power capacity
•	Cooling water consumption is for the injection molding process; mold cooling requirements are not included.
•	The figures in the above table are subject to change without prior notice due to continuous research and development.

Injection unit	Model		PRO 550 WD
	Item	Unit	S	A	B	C
	Screw diameter	mm	85	90	95	100
	Injection Weight (PS)	g	1880	2107	2348	2602
	Calculated Injection Vol.	cm³	2066	2316	2580	2859
	Injection Pressure	kg/cm²	1914	1707	1533	1383
	Injection Rate	cm³/sec	447	501	559	619
	Injection Stroke	mm	364
	Plasticizing Capacity	kg/hr	204	234	268	304
	Screw Speed	rpm	0~102
	Screw L/D	-	20.2:1	19.2:1	18.1:1	17.25:1
	Injection Speed	mm/sec	78

Clamping Unit (Double toggle)	Clamping Force	ton	550
	Opening Stroke	mm	770
	Min. Mold Thickness	mm	420
	Max. Mold Thickness	mm	880
	Max. Mold Weight	kg	4200
	Tie-bar Clearance	mm	900*760
	Platen Size	mm	1300*1160
	Ejector Force	ton	17.2
	Ejector Stroke	mm	180

General ※HYBRID Green color	Heater Capacity	kW	54.54
	Pump Motor Capacity	kW	66[75]
	Total Wattage	kW	121.74[106.2]
	Oil Tank Capacity	ℓ	735[1100]
	Machine Size (L x W x H)	m	9.472.132.39 [9.472.132.39]
	Machine Weight	ton	30
	Water Requirement	ℓ/min	66[150]

•	Calculated Injection Volume = Cross-sectional area of screw x Screw stroke
•	Injection Weight = Calculated injection volume x Material constant
•	Total Power Capacity = Heater capacity + Motor capacity + Control power capacity
•	Cooling water consumption is for the injection molding process; mold cooling requirements are not included.
•	The figures in the above table are subject to change without prior notice due to continuous research and development.